Water-Based vs Longer-Wear Hair System Adhesive: Which Should You Use?
Hair system adhesives fall into two broad families: water-based adhesives, such as the GHOSTBOND range, and longer-wear adhesives such as Walker Ultra Hold and Walker Extreme Hold, a silicone-based formula. Both hold a system securely when they are applied well, but they behave differently on the skin, last for different lengths of time, and suit different routines. This guide explains the differences so you can choose the right one.
Water-based adhesive
Water-based adhesives go on milky white and dry clear as their water content evaporates. Most wearers apply several thin layers, letting each one turn clear before the next, and then place the system. GHOSTBOND adhesives are water-based, and a single application usually holds for around one to two weeks, depending on your skin, the adhesive you choose and how much you sweat.
Water-based adhesives are widely used by wearers who rebond regularly, and many people with sensitive skin find them comfortable. Within the GHOSTBOND range there are formulas for different needs: Classic for dependable everyday hold, XL (now Endure) for oily skin and active wearers, Platinum (now Sport) for maximum strength and heat resistance, and Supreme (now Motion) for the most invisible finish.
Longer-wear adhesive
Longer-wear adhesives are designed to keep a system in place for weeks rather than days. Walker rates both Ultra Hold liquid and Extreme Hold at four weeks or more. Ultra Hold dries clear, and Extreme Hold is Walker's strongest silicone-based adhesive.
The trade-off is in removal and skin care. A longer bond means longer between cleans, so skin preparation and a scalp protector matter more, and these adhesives are removed with a dedicated solvent such as Walker C-22. If you only rebond every few weeks, or visit a studio for maintenance, a longer-wear adhesive can save time.
How to choose
How often you rebond
If you remove and clean your system every week or two, a water-based adhesive fits that routine. If you want a bond that lasts several weeks between maintenance appointments, a longer-wear adhesive is designed for it.
Your skin
Oily skin and heavy sweat challenge any bond. Within water-based adhesives, XL and Platinum are made for these conditions. If your skin is sensitive, start with a water-based adhesive and a scalp protector, and patch test anything new. Our guide to hair system adhesive and sensitive skin covers this in more detail.
Your base
Both families are used on lace and poly bases. GHOSTBOND Supreme is formulated for the most invisible finish on lace and poly, and many wearers combine a liquid adhesive with tape, using tape around the back and sides and adhesive at the front. Our guide to glue vs tape explains how the two work together.
Removing each type
Whichever adhesive you use, remove it fully before rebonding. Ghostbuster, now called BondGone, is made for GHOSTBOND, while Walker C-22 and Lace Release handle longer-wear adhesives and tape. Our guide to removing hair system glue and tape walks through the process.
Still deciding?
If you are new to hair systems, a water-based adhesive such as GHOSTBOND Classic or XL is a straightforward place to start. If your system keeps lifting, our guide to why a hair system lifts may point to the cause. You can find both families of adhesive in our hair system glue and adhesives collection, with free UK delivery on orders over £50.
Buy genuine GHOSTBOND from an official UK stockist
Hair4All is an Authorised and Approved distributor of GHOSTBOND, supplied directly by Professional Hair Labs. Same-day dispatch on orders placed before 2pm, Monday to Friday, and free UK delivery on orders over £50.



