Hair System Glue: How to Choose, Apply and Remove It
Hair system glue is a liquid adhesive that bonds a hair system, toupee or lace wig to the scalp. It gives a closer and usually longer-lasting hold than tape, and it is the usual choice for an invisible lace front. This guide explains the two main types of hair system glue, how to choose between them, and how to apply and remove glue without damaging your system or your skin.
Water-based and long-wear hair system glue
Hair system adhesives fall into two broad families. Water-based adhesives, such as the GHOSTBOND range, go on milky white and dry clear as their water content evaporates. A single application usually holds for around one to two weeks, depending on your skin, the adhesive you choose and how much you sweat, and many people with sensitive skin find them comfortable.
Longer-wear adhesives are designed to keep a system in place for weeks rather than days. Walker rates both Ultra Hold liquid and Extreme Hold at four weeks or more. Ultra Hold dries clear, and Extreme Hold is Walker's strongest silicone-based adhesive. The trade-off is in removal and skin care: a longer bond means longer between cleans, so skin preparation matters more, and these adhesives are removed with a dedicated solvent such as Walker C-22. Our guide to water-based vs long-wear adhesive compares the two in detail.
Choosing a GHOSTBOND adhesive
GHOSTBOND renamed its adhesives for 2026 and says the formulas are unchanged. Each one is made for a different need:
- GHOSTBOND Endure (formerly XL): an all-climate hold for multi-week wear, built to hold in heat and humidity and stay secure in the cold.
- GHOSTBOND Sport (formerly Platinum): a sweat and oil resistant hold for active lifestyles.
- GHOSTBOND Motion (formerly Supreme): a matte, no-shine finish that blends with skin tones, for a discreet hairline on camera.
- GHOSTBOND Classic: formulated for oily scalps and lasting up to four weeks.
- GHOSTBOND Daily (formerly Glow Up): a gentle daily formula with Peelable Tech for easy removal.
If you are not sure which suits you, our GHOSTBOND Adhesive Finder recommends one in four questions, and our guide to which GHOSTBOND is best compares the full range.
How to apply hair system glue
- Prepare the skin. Clean and dry the bonding area. GHOSTBOND Scalp Protector preps the skin before your adhesive.
- Apply a thin first layer. Brush a thin layer of adhesive onto the bonding area and let it dry from milky white to clear.
- Build up thin layers. Most wearers apply several thin layers, letting each one turn clear before the next. Thick layers take longer to dry and can stay tacky or turn white.
- Place the system. Line the front up with your hairline and press the system down from front to back, without sliding it once it touches the adhesive.
Our step-by-step guide on how to apply hair system glue covers each stage in more detail.
How long does hair system glue last?
A water-based GHOSTBOND bond usually holds for around one to two weeks, and Walker rates Ultra Hold and Extreme Hold at four weeks or more. Wear time depends on your skin, your climate and your routine. Oily skin, heavy sweat and heat all shorten it, which is why Sport and Endure are made for those conditions. Cold, dry weather affects adhesive too, which our winter bonding guide covers. If your system lifts early, our guide on why a hair system lifts explains the usual causes.
Removing hair system glue
Use a remover rather than pulling the system off. GHOSTBOND BondBreak suits anyone who removes a bonded hair system, and those who find removal uncomfortable. GHOSTBOND BondGone is made for cleaning adhesive off the hair system rather than the skin. Long-wear Walker adhesives are removed with a dedicated solvent such as Walker C-22. Our guide on removing hair system glue and tape covers each step, and every remover we stock is in our glue and tape removers collection.
Sensitive skin
If your skin reacts to adhesive, patch test any new product first, keep the bonding area clean and use a scalp protector. Our guide to hair system adhesive and sensitive skin explains the common causes of irritation and what helps.
Is your GHOSTBOND genuine?
New GHOSTBOND packs carry a Clarity Code, a unique code on each pack that you can scan with your phone to check it is genuine. Hair4All is an Authorised and Approved distributor of GHOSTBOND, and our stock is supplied directly by Professional Hair Labs. Our guide on how to spot fake GHOSTBOND explains what to look for.
Buying hair system glue in the UK
Our hair system glue collection has the full 2026 GHOSTBOND range and Walker's liquid adhesives. Orders placed before 2pm on a working day are dispatched the same day, every order is sent in discreet, plain packaging, and UK delivery is free on orders over £50.
Buy genuine GHOSTBOND from an official UK stockist
Hair4All is an Authorised and Approved distributor of GHOSTBOND, supplied directly by Professional Hair Labs. Same-day dispatch on orders placed before 2pm, Monday to Friday, and free UK delivery on orders over £50.
Hair system glue FAQ
What is the strongest hair system glue?
Walker describes Extreme Hold as its strongest silicone-based adhesive and rates it at four weeks or more. In the GHOSTBOND range, Sport is made for sweat and oil, and Endure for all-climate, multi-week wear.
Can I use hair system glue and tape together?
Yes. Many wearers use tape at the sides and back and glue along the front hairline. Our guide to hair system glue vs tape explains when each works best.
Is water-based glue better for sensitive skin?
Many people with sensitive skin find water-based adhesives comfortable, but everyone's skin is different, so patch test any new adhesive first.
Hair4All supplies hair system adhesives, tapes and aftercare across the UK, and is an Authorised and Approved distributor of GHOSTBOND.



