Hair System Tape: Types, Hold Times and How to Apply It
Hair system tape is double-sided adhesive tape that holds a hair system, toupee or wig to the scalp. It is the quickest way to attach a system and the easiest to take off again, which is why many wearers start with tape before they try liquid glue. This guide compares the main tapes, explains how to apply and remove them, and covers what affects how long they last.
What hair system tape is
One side of the tape sticks to the base of the system and the other to clean, dry skin. Tape comes in rolls, which you cut to the shape of your base, and in pre-cut strips, often called minis, which save time and give you the same strip every time. Each tape is rated for a different length of wear, from a few days to four weeks or more, so the right one depends on how often you take your system off and how your skin reacts.
The main types of hair system tape
Walker Tape is one of the best-known names in hair system tape, and it rates each of its tapes for a different length of wear:
- Walker Ultra Hold: the longest hold from tape, rated by Walker at four weeks or more. It comes in 3/4" and 1" rolls from 3 to 36 yards, and as packs of 72 pre-cut minis.
- Walker No-Shine: an extended hold for sensitive skin, and the least visible tape under a lace base. Rated at two to four weeks or more.
- Walker Lace Front: a gentler tape for the front hairline on lace systems, rated at two to three weeks.
- Walker 1522 Clear: for new wearers, sensitive skin or anyone who removes their system often, designed for one to seven days.
- Walker German Brown: for poly systems and as a barrier under hard-bond adhesives. It contains latex, so it is not suitable if you have a latex allergy.
If you are new to tape, 1522 Clear is designed with new wearers in mind. Once you know how your skin reacts and how long you want to go between cleans, No-Shine or Ultra Hold give a longer hold. Our Walker Tape guide compares every tape in more detail.
Rolls or pre-cut minis?
A roll lets you cut tape to the exact outline of your base, which suits full-perimeter bonding and larger systems. Pre-cut minis are quicker to use and give a consistent strip every time, which many wearers prefer for the sides and back of a system. If you wear a system every day, a 12 or 36 yard roll usually works out cheaper per strip than minis.
How to apply hair system tape
- Clean the skin. Wash the area where the tape will sit and make sure it is completely dry. Oil, sweat or moisturiser left on the skin weakens the bond.
- Prepare the skin. A scalp protector such as Walker Scalp Protector or GHOSTBOND Scalp Protector, applied to clean, dry skin and left to dry, preps the skin before the tape goes on.
- Clean the base. Remove any old tape and residue from the system with a remover such as Walker C-22 Solvent, then let the base dry.
- Tape the base. Cut strips from a roll, or use minis, and press them onto the base with the liner still on the other side. Place the strips side by side without overlapping them.
- Position the system. Peel off the liners, line the front of the system up with your hairline, and press it down from front to back, holding each area for a few seconds.
If you use tape and glue together, our guide on how to apply hair system glue covers the rest of the routine.
How long does hair system tape last?
Walker rates Ultra Hold at four weeks or more, No-Shine at two to four weeks or more, Lace Front at two to three weeks and 1522 Clear at one to seven days. These are the upper end of what each tape can do. Oily skin, heavy sweat, heat and frequent hair washing all shorten wear time, and so does skipping skin preparation. If your tape lifts sooner than you expect, our guide on why a hair system lifts covers the usual causes.
Removing hair system tape
Never pull a taped system straight off. Apply Walker C-22 Solvent or Lace Release around the edges, give it a minute to soften the bond, then lift the base away slowly, adding more remover as you go. Clean the remaining residue from the base and your skin before you reapply. Our guide on how to remove hair system glue and tape covers each step.
Tape, glue or both?
Tape is quicker to apply and remove, while liquid adhesive usually gives a longer and more invisible hold, especially along a lace front. Many wearers use both, with tape at the sides and back and glue along the front hairline. Our guides on hair system glue vs tape and water-based vs long-wear adhesive explain when each works best.
Buying hair system tape in the UK
We stock the core Walker Tape range in rolls and minis in our hair system tape collection, alongside removers and scalp care. Orders placed before 2pm on a working day are dispatched the same day, every order is sent in discreet, plain packaging, and UK delivery is free on orders over £50.
Hair system tape FAQ
Which hair system tape holds longest?
Walker Ultra Hold, which Walker rates at four weeks or more.
Which tape is best for sensitive skin?
No-Shine for an extended hold, or 1522 Clear for shorter wear and frequent removal. If you have a latex allergy, avoid German Brown, which contains latex.
Can hair system tape be reused?
No. Once a strip has been removed it will not hold properly again, so replace the tape each time you rebond.
Hair4All supplies hair system tape, adhesives and aftercare across the UK, and is an Authorised and Approved distributor of GHOSTBOND.



